Autologous leucocyte and platelet rich in fibrin (L-PRF) - is it a competitive solution for bone augmentation in maxillary sinus lift? A 6-month radiological comparison between xenografts and L-PRF.

Maxillary lateral sinus floor elevation, or external sinus lift, is a widespread surgical intervention in the dental field. Insertion of implants in the posterior region of the maxilla often requires reconstruction of the remaining native bone that has insufficient volume. Background and aims: Much of the research published involves using artificial products, like xenografts and resorbable collagen membranes, after a prior Cone Beam Computer Tomography (CBCT) investigation. Nowadays, more accessible access, less financial costs, a biological approach, and faster healing are objectives that surround this procedure. Leucocytes and platelets rich in Fibrin (L-PRF) are a natural component with a high concentration of growth factors. Due to its regenerative properties and lack of complications, it is used in several medical fields, like orthopedics, dermatology, and oral surgery. This retrospective study aims to compare results in bone height and volume obtained through external sinus lift, either by using xenografts or autologous plasma rich in fibrin, by evaluating the quantity of new bone formation from a radiological point of view. Methods: Fifty-eight Caucasian patients were included in this retrospective study; 48 were submitted to xenograft procedure, and 10 were selected for L-PRF grafting material with simultaneous implant placement. Lack of clinical and histological studies performed on patients with L-PRF surgeries limited us in choosing a larger group for the radiological analysis. CBCT evaluation was performed before surgery and 6 months after. All patients selected for the study presented good general and oral health, acute oral and sinus infections excluded; smoking and periodontal disease were also criteria of exclusion. Two operators performed the measurements in pre-established landmarks in different time frames. The two independent groups were compared with the Wilcoxon rank-sum test for quantitative data. Qualitative characteristics were described as counts and percentages. All analyses were performed in an R environment for statistical computing and graphics. Results: Mean bone height gain in the xenograft group in the regions was as follows: 7.44 for the anterior landmark, 12.14 for the median and 8.28 for the distal. The mean group height gained for the L-PRF group was 0.1 anteriorly, -0.18 for the median measurement, and 0.23 distally. We obtained excellent overall reliability for all the height measurements between the two operators. Conclusions: Further studies must be conducted to establish new sets of surgical protocols in case L-PRF alone is found to be a reliable, stable, biological alternative to the well-documented xenografts in external sinus lifts. Radiological results, although promising, must be further applied in long term clinical survival of the implants in the grafted sites. Also, studies combining L-PRF in conjunction with xenograft might bring improved clinical results in terms of reduced postoperative complications and accelerated healing.

Effects of Acidic Environments on Dental Structures after Bracket Debonding.

Brackets are metallic dental devices that are very often associated with acidic soft drinks such as cola and energy drinks. Acid erosion may affect the bonding between brackets and the enamel surface. The purpose of this study was to investigate the characteristics of brackets' adhesion, in the presence of two different commercially available drinks. Sixty human teeth were divided into six groups and bonded with either resin-modified glass ionomer (RMGIC) or resin composite (CR). A shared bond test (SBS) was evaluated by comparing two control groups with four other categories, in which teeth were immersed in either Coca-ColaTM or Red BullTM energy drink. The debonding between the bracket and enamel was evaluated by SEM. The morphological aspect correlated with SBS results showed the best results for the samples exposed to artificial saliva. The best adhesion resistance to the acid erosion environment was observed in the group of teeth immersed in Red BullTM and with brackets bonded with RMGIC. The debonded structures were also exposed to Coca-ColaTM and Red BullTM to assess, by atomic force microscopy investigation (AFM), the erosive effect on the enamel surface after debonding and after polishing restoration. The results showed a significant increase in surface roughness due to acid erosion. Polishing restoration of the enamel surface significantly reduced the surface roughness that resulted after debonding, and inhibited acid erosion. The roughness values obtained from polished samples after exposure to Coca-ColaTM and Red BullTM were significantly lower in that case than for the debonded structures. Statistical results evaluating roughness showed that Red BullTM has a more erosive effect than Coca-Cola™. This result is supported by the large contact surface that resulted after debonding. In conclusion, the prolonged exposure of the brackets to acidic drinks affected the bonding strength due to erosion propagation into both the enamel-adhesive interface and the bonding layer. The best resistance to acid erosion was obtained by RMGIC.

Mechanical Properties of Orthodontic Cements and Their Behavior in Acidic Environments.

The present research is focused on three different classes of orthodontic cements: resin composites (e.g., BracePaste); resin-modified glass ionomer RMGIC (e.g., Fuji Ortho) and resin cement (e.g., Transbond). Their mechanical properties such as compressive strength, diametral tensile strength and flexural strength were correlated with the samples' microstructures, liquid absorption, and solubility in liquid. The results show that the best compressive (100 MPa) and flexural strength (75 Mpa) was obtained by BracePaste and the best diametral tensile strength was obtained by Transbond (230 MPa). The lowestvalues were obtained by Fuji Ortho RMGIC. The elastic modulus is relatively high around 14 GPa for BracePaste, and Fuji Ortho and Transbond have only 7 GPa. The samples were also subjected to artificial saliva and tested in different acidic environments such as Coca-Cola and Red Bull. Their absorption and solubility were investigated at different times ranging from 1 day to 21 days. Fuji Ortho presents the highest liquid absorption followed by Transbond, the artificial saliva has the best absorption and Red Bull has the lowest absorption. The best resistance to the liquids was obtained by BracePaste in all environments. Coca-Cola presents values four times greater than the ones observed for artificial saliva. Solubility tests show that BracePaste is more soluble in artificial saliva, and Fuji Ortho and Transbond are more soluble in Red Bull and Coca-Cola. Scanning electron microscopy (SEM) images evidenced a compact structure for BracePaste in all environments sustaining the lower liquid absorption values. Fuji Ortho and Transbond present a fissure network allowing the liquid to carry out in-depth penetration of materials. SEM observations are in good agreement with the atomic force microscopy (AFM) results. The surface roughness decreases with the acidity increasing for BracePaste meanwhile it increases with the acidity for Fuji Ortho and Transbond. In conclusion: BracePaste is recommended for long-term orthodontic treatment for patients who regularly consume acidic beverages, Fuji Ortho is recommended for short-term orthodontic treatment for patients who regularly consume acidic beverages and Transbond is recommended for orthodontic treatment over an average time period for patients who do not regularly consume acidic beverages.

Human Enamel Fluorination Enhancement by Photodynamic Laser Treatment.

Poor oral hygiene leads to serious damages of theteeth's surface enamel such as micro-abrasions and acid erosion. These alterations combined with bacterial plaque result in cavity appearance. Prophylactic measures include various techniques for enamel surface restoration. Fluorination is one of the most important treatments for this purpose. Therefore, in the present research, we investigated the classical fluorination treatment compared with laser photodynamic fluorination performed on human enamel samples with poor surface quality. Three sample groups were investigated: veneer (F), inlay (I), and crowns (C). The general morphologic aspect was investigated by scanning electron microscopy (SEM), and the specific details such as the fine microstructure and nanostructure were investigated by atomic force microscopy (AFM) of the surface roughness. The samples were also investigated by Fourier transformed infrared attenuated total reflectance (FTIR-ATR) to evidence the fluorination effect on the enamel surface. Results showed that all initial samples had an altered state with micro-abrasions and erosion with mineral loss, which increase the surface roughness. The F group was the most damaged, having a higher roughness, and the I group was less damaged. Classic fluorination treatment partially restored the enamel by local re-mineralization, but did not obtain the parameters of healthy enamel. However, a significant decrease of the roughness was observed (statistical relevance p = 0.001 with the Breusch-Pagan Test). This fact was supported by the presence of newly formed fluorides in the FTIR-ATR spectra. The photodynamic laser fluorination restores the enamel in an enhanced manner by a strong re-mineralization, which implies a significant roughness value decrease comparable to healthy enamel. The Breusch-Pagan Test confirmed the relevance with p = 0.001. This is due to an extended re-mineralization abundant in fluoride crystals as observed by AFM and FTIR. Statistical p-values regarding laser application were in the range of 0.02-0.06, supporting its relevance in the fluorination effect. The final conclusion is that the photodynamic effect is able to favor the newly formed fluoride deposition onto the affected sites of the enamel surface.

Accuracy Report on a Handheld 3D Ultrasound Scanner Prototype Based on a Standard Ultrasound Machine and a Spatial Pose Reading Sensor.

The aim of this study was to develop and evaluate a 3D ultrasound scanning method. The main requirements were the freehand architecture of the scanner and high accuracy of the reconstructions. A quantitative evaluation of a freehand 3D ultrasound scanner prototype was performed, comparing the ultrasonographic reconstructions with the CAD (computer-aided design) model of the scanned object, to determine the accuracy of the result. For six consecutive scans, the 3D ultrasonographic reconstructions were scaled and aligned with the model. The mean distance between the 3D objects ranged between 0.019 and 0.05 mm and the standard deviation between 0.287 mm and 0.565 mm. Despite some inherent limitations of our study, the quantitative evaluation of the 3D ultrasonographic reconstructions showed comparable results to other studies performed on smaller areas of the scanned objects, demonstrating the future potential of the developed prototype.

Photodynamic Therapy with Natural Photosensitizers in the Management of Periodontal Disease Induced in Rats.

This study aims to investigate the effect of new natural photosensitizers (PS) (based on oregano essential oil, curcuma extract, and arnica oil) through in vitro cytotoxicity and biological tests in rat-induced periodontal disease, treated with photodynamic therapy (aPDT). The cytotoxicity of PS was performed on human dental pulp mesenchymal stem cells (dMSCs) and human keratinocyte (HaCaT) cell lines. Periodontal disease was induced by ligation of the first mandibular molar of 25 rats, which were divided into 5 groups: control group, periodontitis group, Curcuma and aPDT-treated group, oregano and aPDT-treated group, and aPDT group. The animals were euthanized after 4 weeks of study. Computed tomography imaging has been used to evaluate alveolar bone loss. Hematological and histological evaluation showed a greater magnitude of the inflammatory response and severe destruction of the periodontal ligaments in the untreated group.. For the group with the induced periodontitis and treated with natural photosensitizers, the aPDT improved the results; this therapy could be an important adjuvant treatment. The obtained results of these preliminary studies encourage us to continue the research of periodontitis treated with natural photosensitizers activated by photodynamic therapy.

Photodynamic Therapy (PDT) in Prosthodontics: Disinfection of Human Teeth Exposed to Streptococcus mutans and the Effect on the Adhesion of Full Ceramic Veneers, Crowns, and Inlays: An In Vitro Study.

The use of PDT in prosthodontics as a disinfection protocol can eradicate bacteria from tooth surfaces by causing the death of the microorganisms to which the photosensitizer binds, absorbing the energy of laser light during irradiation. The aim of the study was to investigate the capacity of PDT to increase the bond strength of full ceramic restorations. In this study, 45 extracted human teeth were prepared for veneers, crowns, and inlays and contaminated with Streptococcus mutans. Tooth surfaces decontamination was performed using a diode laser and methylene blue as a photosensitizer. The disinfection effect and the impact on tensile bond strength were evaluated by scanning electron microscopy (SEM) and pull-out tests of the cemented ceramic prosthesis. Results show that the number of bacteria was reduced from colonized prepared tooth surfaces, and the bond strength was increased when PDT was used. In conclusion, the present study indicates that using PDT as a protocol before the final adhesive cementation of ceramic restorations could be a promising approach, with outstanding advantages over conventional methods.

Three-dimensional periodontal investigations using a prototype handheld ultrasound scanner with spatial positioning reading sensor.

AIM: To demonstrate the feasibility of the 3D ultrasound periodontal tissue reconstruction of the lateral area of a porcine mandible using standard 2D ultrasound equipment and spatial positioning reading sensors. MATERIAL AND METHOD: Periodontal 3D reconstructions were performed using a free-hand prototype based on a 2D US scanner and a spatial positioning reading sensor. For automated data processing, deep learning algorithms were implemented and trained using semi-automatically seg-mented images by highly specialized imaging professionals. RESULTS: US probe movement analysis showed that non-parallel 2D frames were acquired during the scanning procedure. Comparing 3 different 3D periodontal reconstructions of the same porcine mandible, the accuracy ranged between 0.179 mm and 0.235 mm. CONCLUSION: The present study demonstrated the diagnostic potential of 3D reconstruction using a free-hand 2D US scanner with spatial positioning readings. The use of auto-mated data processing with deep learning algorithms makes the process practical in the clinical environment for assessment of periodontal soft tissues.

Clinical Remission in a 72-Year-Old Patient with a Massive Primary Cutaneous Peripheral T-Cell Lymphoma-NOS of the Eyelid, Following Combination Chemotherapy with Etoposide Plus COP.

Peripheral T-cell lymphoma not otherwise specified (PTCL-NOS) is the rarest subtype of primary cutaneous lymphoma, accounting for approximately 2% of cutaneous lymphomas. The rarity of primary cutaneous PTCL-NOS means that there is a paucity of data regarding clinical and histopathological features and its clinical course. This malignancy is an aggressive and life-threatening hematological malignancy that often presents mimicking other less severe plaque-like skin conditions. Due to the nonspecific nature of these lesions, CD4-positive cutaneous T-cell lymphoma (CTCL) is often misdiagnosed as either mycosis fungoides or Sezary syndrome. We describe a patient who presented with a large tumoral mass in the right frontal area, with involvement of the right upper eyelid and the ocular globe, causing loss of vision greatly impacting the quality of life. Biopsy revealed primary cutaneous PTCL-NOS, treated successfully with cyclophosphamide, doxorubicin, vincristine, and prednisone (CHOP) plus etoposide combination chemotherapy. As elderly patients are indicated to receive attenuated doses of chemotherapy, CHOP-based regimens represent viable options.

Assessment and Characterization of Some New Photosensitizers for Antimicrobial Photodynamic Therapy (aPDT).

The novelty of this study consists on the formulation and evaluation of five complex experimental natural photosensitizers (PS): gel with oregano essential oil (O), gel with methylene blue (AM), gel with a mixture of essential oils (Thieves-H), gel with arnica oil and curcuma extract (CU) and gel with frankincense essential oil (T), used as photosensitizing agents (PS) in antimicrobial photodynamic therapy (aPDT) in the control of microbial biofilm in oral cavity. The experimental PS were characterized by gas chromatography-mass spectrometry (GC-MS), Fourier-transform infrared spectroscopy (FTIR), UV-Vis spectroscopy, cytotoxicity assay, antimicrobial effect and scanning electron microscopy (SEM). The IR spectra of the experimental PS with essential oils exhibit absorption bands due to the presence of water and glycerol in high quantities. The studied compounds had a reduced cytotoxic effect on cell cultures. The lowest cytotoxic effect was observed in experimental PS with oregano essential oil and methylene blue PS. Essential oils with proven antibacterial capabilities used in experimental PS confer antibacterial activity to the gels in which they are incorporated, an activity that may be more efficient use of a PDT therapy. Single bacteria were detected mainly by SEM after 12 h, while aggregate bacteria and micro colonies dominated the samples at 48 h.

Current treatment modalities of orthodontically induced white spot lesions and their outcome - a literature review.

INTRODUCTION: White spot lesion is a demineralization of the enamel that appears as a white spot on the surfaces of the tooth. The cause of this spot is determined by the activity of the bacterial plaque and it represents the initial stage of a carious lesion. This lesion is a common side effect for patients with fixed orthodontic appliances mainly because of the brackets' position that favors the accumulation of plaque that ultimately leads to the formation of the white spot. METHODS: We conducted a search on a single database, PubMed. "Orthodontic", "white spot lesions", "enamel demineralization treatment" and "remineralization" were the search terms used. We found 324 articles, but we took in consideration only the ones from the last 10 years, which resulted in 223 articles. RESULTS: The first step after research was article selection: first by scrutinizing the title and secondly by reviewing the abstracts or full texts. The exclusion criteria were: meta-analysis, reviews, original articles regarding prevention of white spot lesions and their prevalence or incidence. We included the articles that seemed relevant for the treatment of white spot lesions, made either on extracted teeth either on orthodontic patients. We found 75 articles to be eligible for this research and we eliminated 5 because of the lack of an abstract or full text and a further 22 were rejected because they did not fit the aforementioned criteria. CONCLUSION: Although some traditional methods for the treatment of white spot lesions seem to have undesirable results, nowadays with new technologies and thorough investigations in nanotechnology, the eradication of the lesion appears to be short term.

Periodontal evaluation using a non-invasive imaging method (ultrasonography).

The periodontal disease and gingival bleeding are highly prevalent in the adult population worldwide. The World Health Organization (WHO) data shows that 90-100% of the 34-year-old adults present gingival inflammation. Therefore, an investigation method is required to allow the assessment of the periodontal disease as well as the monitoring of the evolution of the gingival inflammation after periodontal treatments. Non-invasive and operator-independent methods for periodontal examination are necessary for diagnosing and monitoring the periodontal disease. The periodontal ultrasonography is a reliable technique for visualizing the anatomical elements which are necessary to diagnose the periodontal status. Using this imaging technique the dentino-enamel junction, the cortical bone, the radicular surface from the crown to the alveolar bone, the gingival tissue can be seen without interfering with those elements during the examination. Also, calculus visualization is possible before and after scaling in order to evaluate the quality of the treatment. Using 2D ultrasonography is not feasible in dental practice as it requires extensive experience and is also time consuming. The reproducibility of the 2D slices is very difficult in order to have the possibility to compare different investigations efficiently. 3D reconstructions of the periodontal tissue can be a very good alternative to eliminate the operator dependence. Ultrasonography allows the practitioner to visualize the anatomic elements involved in making a periodontal diagnosis. It also allows tracking of subsequent changes. This method is not commonly used for periodontal examination and further studies are required. Previous studies show that ultrasonography can be a reliable non-invasive method to diagnose and monitor the periodontal disease.

Observational study of the bisphosphonate-related osteonecrosis of jaws.

INTRODUCTION: The bisphosphonate-related osteonecrosis of the jaw was first referred to in 2003. Bisphosphonates action is focused on the osteoclasts. The drastic inhibition of the osteoclastic function is harmful for the jaws which are the only bones of the human skeleton in relative contact with the external environment. The adverse effects of the bisphosphonate-related therapy include the pathology for which they are prescribed, the atypical fractures in pathological bone. METHOD: The aim of this research was to analyze the risk factors and the treatment methods in case of osteonecrosis of the jaws. To achieve these goals, the author analyzed the observation sheets of the patients admitted to the Oral and Maxillofacial Surgery Clinic during the period 2010-2015. The inclusion criteria were as follows: treatment with bisphosphonates, current or previous; the lesions of the mucous gingiva of the maxillaries followed by exposed necrotic bone, older than 8 weeks, with no tendency of healing; specific radiological image showing extended osteolysis with diffuse outline or radiopacity surrounded by radio-transparence, representing the necrotic bone sequestered; no metastasis in the necrotic maxillary bone; patient with no medical background of cervical-facial radiations. The patients who met these criteria were admitted in the study after signing the informed consent. Afterwards, the information found in the notes of the observational sheet (anamnesis, general examination and the imagistic investigation, treatment, postoperative recovery, prescription, postoperative recommendations) were gathered and submitted for statistic analysis. RESULTS: Of the 20 patients in total, 13 were women and 7 men, of ages ranging from 43 to 83. The most numerous cases were registered in the seventh age decade. All patients included in the study had lesions of the gingival maxillary mucosal areas with exposure of the subjacent necrotic bone. 60% of them were under intravenous treatment with zoledronic acid (Zometa®). A single patient was under oral treatment with bisphosphonates. 19 of these 20 patients developed osteonecrosis following a dental extraction while one case was due to the instability of the mandibular mobile prosthesis. 61% of the patients included in the study developed a necrotic process in the mandibular bone, 80% of the localizations were in the posterior area. As first intention, the choice of treatment was represented by local lavages with antiseptic solutions, general antibiotics and sequestrectomy. Of these patients, a third had relapsed and needed radical surgery treatment. CONCLUSIONS: Prevention of the bisphosphonate-related osteonecrosis of the jaw represents the best method of treatment. The development of bone sequesters damages the volume of the maxillary bone as such, reducing the chances for prosthetic functional rehabilitation of the dento-maxillary system. An increase in the quality of life by oral restoration of these patients may represent a challenge.

The influence of occlusal stabilization appliances on cervical dystonia symptoms.

OBJECTIVES: The aim of this study was to assess the therapeutic efficiency of the occlusal stabilization appliance (OSA) in patients with cervical dystonia (CD). METHODS: The study included 11 patients aged between 29 and 80 years, 7 women and 4 men, diagnosed with primary CD. The patients underwent an extra- and intra-oral clinical examination, followed by para-clinical examinations, necessary for the specifications of the OSA. The following data were recorded: demographic parameters, CD duration, management of the disease, dental impression, recording of the centric relationship, recording of the position of the upper jaw with the facial bow. A standardized OSA was manufactured in a private dental laboratory. Patients received instructions for wearing the OSA for 24 hours. Patients filled a questionnaire designed by us, which evaluated the effects of wearing the OSA over a 24-hours period on the symptoms of CD: muscles contraction, pain, discomfort while walking, sleep quality, tremor. The patients kept the dental appliances, and after three months they completed the questionnaire one more time. RESULTS: The OSA was applied on the lower arch in 3 (27.3%) patients and on the upper arch in 8 (72.7%) patients. The OSA wearing time for the first 24 h was on average 19.2±6 hours. Total relaxation of dystonic muscles was reported by 9 (81.8%) patients, while 2 (18.2%) patients related partial muscle relaxation. Seven (63.6%) patients reported a pain decrease. Increased comfort while walking was observed by 8 (72.7%) patients. Two (18.2%) patients described an increase of sleep quality. In two (18.2%) patients the tremor disappeared. All patients reported difficulties while eating and removed the OSA during meals. Patients who wore the OSA for more hours, experienced a pain decrease (p=0.08), an increase in sleep quality (p=0.1), the disappearance of the tremor (p=0.1). After three months, only seven patients continued to use the OSA. More patients described a pain decrease after three months (5 (71.4%) vs. 4 (57.1%); p=0.5), relaxation of dystonic muscles (7 (100%) vs. 6 (85.7%); p=0.3). CONCLUSIONS: The use of OSA might be beneficial in CD patients, as it reduced the dystonic symptoms, pain severity and improved the quality of sleep.

Comparative radiographic assessment of a new bioceramic-based root canal sealer.

BACKGROUND AND AIMS: The aim of this study was to assess the radiopacity of two bioceramic-based root canal sealers, the conventional TotalFill BC sealer (FKG Dentaire Switzerland) and a new experimental filling material developed in collaboration with 'Raluca Ripan' Institute for Research in Chemistry, Cluj-Napoca. METHODS: Five disc samples were prepared using both materials (10 mm diameter × 1 mm thickness), being subjected to digital radiography together with aluminum step wedges (1 to 12 mm in thickness), in accordance with ISO 6876: 2012. Radiopacity was determined by the computer analysis of the images obtained. Four different areas were selected for each sample, corresponding to a disk-sample quadrant. Statistical analysis was performed using ANOVA. RESULTS: Both materials showed a radiopacity that was 3 mm greater than the equivalent thickness of aluminum. Total Fill BC showed greater radiopacity than the experimental material, but the differences were not statistically significant. CONCLUSIONS: Both materials comply with ISO 6876: 2012 recommendations on minimum radiopacity.

Two-body wear simulation influence on some direct and indirect dental resin biocomposites - A qualitative analysis.

PURPOSE: The aim of this study was to qualitatively assess the outcomes of two in vitro aging methods, thermal-cycling and twobody wear simulation accomplished with a dual-axis chewing device, on the surface characteristics of eight direct and indirect dental resin biocomposites. METHODS: Eighty mesial-occlusal-distal dental cavities were restored with four direct nanohybrid composite materials and with four nano- and micro-hybrid lab-fabricated resin composite inlays. After the restored teeth were subjected to thermal-cycling and wear simulation based on mechanical loading, the surface texture features of the restorations were separately analysed for each of the methods, on epoxy resin models using a digital camera, computer-aided-design system, optical stereo-microscopy and scanning electron microscopy. RESULTS: All the dental restorative resin based composites used in this investigation displayed different cyclic wear patterns after undergoing mechanical loading. After thermal-cycling, the group of resin composite inlays showed a better adaptation, a smoother and more polished occlusal surface compared with direct restorative materials. Only two of direct nanohybrid resin composites performed better after two aging methods. One nanohybrid and the other two microhybrid resin inlays did not perform as expected when they were subjected to simulated wear compared to the rest of test materials. CONCLUSIONS: The use of the two-body wear simulation method revealed important information about the behavior of the dental resin-based composites when multiple oral factors are involved in a lab-simulated condition. Furthermore, the macro- and micro-morphological analysis showed different abrasion patterns among the materials being tested according to the filler percentage and distribution of the particles within the resin matrix.

Effects of CO-CR discrepancy in daily orthodontic treatment planning.

BACKGROUND AND AIMS: Nowadays centric relation is defined as a musculoskeletal stable position, with the condyles forward, as far upward as possible, centered transversely and with the articular disc properly interposed. On the other hand, centric occlusion or maximum intercuspidation is a dental determined position. The purpose of this pilot study is to evaluate the direction, frequency and magnitude of the discrepancy between centric occlusion and centric relation in all three axial directions, in a muscular non-deprogrammed population, before the beginning of orthodontic treatment. METHODS: The study group was represented by 40 symptomatic and asymptomatic patients seeking orthodontic treatment in a private dental office in Cluj-Napoca, Romania between 2014 and 2015. All patients had full records and articulator mounted models. All measurements were analyzed three-dimensionally. RESULTS: 85% of the patients had vertical and 87.5% had horizontal CO-CR discrepancy for both condyles. 87.5% of the cases have had a significant condylar displacement in at least one of the three planes. CONCLUSIONS: We should be aware of the dental occlusion determined by the dental contacts and the occlusion dictated by the musculoskeletal stable position of the condyles. The bigger the discrepancy between these two positions at the level of the condyles, the greater the chances to have either a patient who will develop a form of TMD before/during or after the orthodontic or prosthetic treatment, or a patient suffering already, but poorly diagnosed.

Dental anxiety and fear among a young population with hearing impairment.

BACKGROUND AND AIM: Dental fear and anxiety is a major barrier for dental care provision. Identifying anxious patients can help dental professionals manage them appropriately. The study aimed at assessing dental fear and anxiety among a deaf population in Cluj-Napoca, Romania and their associated and contributing factors. METHOD: In this cross sectional study 165 deaf participants were invited to complete a questionnaire comprising three sections. The first section contained questions about social and economical status, the second comprised a Romanian version of the Modified Dental Anxiety Scale (MDAS) while part three was the Dental Fear Survey (DFS). Data was introduced and analyzed with the Statistical Package for Social Sciences (SPSS) program, version 20.0 (SPSS Inc., Chicago, Illinois, USA). RESULTS: Thirty four point nine percent (34.9%) of respondents were found to be insignificantly anxious, 59.7% were moderately or extremely anxious with 5.3% being identified with dental phobia based on the MDAS scores. Mean total score for dental anxiety on the MDAS scale was 13.7. Patients suffering from a prior negative experience were found to be more anxious (p<0.05). CONCLUSIONS: Dental fear and anxiety is widespread in the deaf communities. Higher percentages were observed among women and people with a previous traumatic dental experience.

Deleterious oral habits in children with hearing impairment.

BACKGROUND AND AIMS: Deleterious oral habits represent a serious public health issue. The information available about this problem in children with hearing impairment is insufficient. The purpose of this study was to investigate the prevalence of deleterious oral habits among children with hearing impairment and comparing results against children without hearing impairment. METHOD: This epidemiological study was carried out in a sample size of 315 children. We used a random sampling technique that included 150 children with hearing impairment and 165 without hearing impairment. All subjects were submitted to a clinical examination. The parents/legal guardians were asked to complete a questionnaire regarding the deleterious habits of their children. RESULTS: The data collected indicated a higher prevalence of deleterious oral habits among children with hearing impairment: 53.3% as opposed to 40.6% among children without hearing impairment. There was a higher incidence of malocclusion in children with hearing impairment (79.3%) compared to children without hearing impairment (57%). CONCLUSIONS: This study highlighted the need to establish protocols for preventive orthodontic treatment at an early age, in order to reduce the deleterious oral habits and prevent malocclusion. Dental institutions/clinicians need to implement oral care programs including proper oral education aiming to promote oral health.

Waardenburg syndrome type 2: an orthodontic perspective.

Waardenburg syndrome is a rare form of neurocristopathy. It is a disorder in the development of neural crest cells, caused by an altered cellular migration during the embryonic phase. That alteration causes an association of different abnormalities such as pigmentary disturbances of the hair, iris, skin, stria vascularis of the cochlea, dystopia canthorum and sensorineural hearing loss. We report a case of a 14-year-old Romanian male, with a family history of Waardenburg syndrome (mother) and Usher syndrome (father - congenitally sensorineural hearing loss and retinal degeneration). The case particularities are: the correlation between malocclusion and Waardenburg syndrome due to hypoplastic alae nasi and also factors that produced hearing loss, which could be Waardenburg syndrome, Usher syndrome or the presence of the connexin 26 (W24X) gene mutation.